High Gloss PVC Lamination Machine

●Model NO.:TMD-I

●Model NO.:TMD-I

●Place of Origin:Guangdong China

●Specification:A level of quality,e.g CE,RoHS,SGS,GMP,etc.

●Origin:Place of Production,Such as:Nanjing,Jiangsu,China.

Product Description

Pur High Glossy Paper Sticking Machine can stick PVC film,Paper,Melamine film,aluminumfoil on MDF boards,partical boards and panels.

Pur High Glossy Paper Sticking Machine Characteristic And Usage:

This production line adopt the special precise hotmelt glue system.This machine is specialize in sticking on panel and multiplayer board.It is suitable for produce high-glossy,panel,cabinet,furniture door,honeycomb board and foam board sticking.

Pur High Glossy Paper Sticking MachineTechnical Specification:

Mode specification Ø 240× 1350mm

Min.Board length 600mm

Board width 1220mm

Board thickness 2-50mm

Feeding speed 1-25m/min

Motivity power 6kw

Heating power 56kw

Paper width 1280mm

Overall Dimensions 12000× 2135× 1800mm

Machine weight 3000kg

Construction:

Dust clean machine+ preheating+ PUR glue spreader+heating oven+ laminating+Automatic load on the HPL,Acrylic sheet device + laminating + layout 2meters

Specification

1.Feeding table:Feeding table frame is made of heavy type aluminium 50 x100,feeding roller is made of good quality steel tube,feeding stable,length of the roller is 1350mm,using the "8" type belt to feed,feeding stable,shake samller,RV63 reducer,motor:0.75KW

2.Dust clean machine:Horizontal brushes with German technology to clean the board,plate and brush into 95 degree,Sticking the High glossy PVC on MDF board,the MDF board must clean very well.If have the dust on the surface,it will result the oranges.Reducer motor:RV50,motor:0.5KW

The clean belt brush which is made in German.

3.Preheating board by infrared lamps,heating fast,save power,focus temperature.Here work purpose is to effectively prevent the glue film generated when the cold plate and the heat glue,effective reduction of water ripple is generated.You can choose the single group infrared lamps or double groups lamps when the different weather.

Heating tunnel:Heating tunnel is using the aluminium 40*40,the width

Of each groups is 500mm,it is can control the each heating tunnel

Temperature in this structure.

4.Glue spread machine:By silicone rubber roller with 100 stainless steel anilox roll combination,two roller have double layers wall respecitively,not out of shape.The anilox roll can effectively control glue amount,it is can control in 30-50 grams per square meters.

PUR Glue sysyem.PUR glue is enviromantal protection glue,sticking better,less amount,This structer can control the glue amount well.Feeding motor is 2*1.5Kw Rv90-40.One set of PUR glue melting system...

Inside empty width:1510mm,roller size:240x1350mm,length of bottom roller:1300,reducer:2x1.5KW,rv 90-40

Roller size

Ø 190x1350mm

Motor

1.5KW

Glue system

55 Gallon

Glue spread type

Roller coating

5.The glue flow flat:Keep glue melt point,reduce glue film

And water ripples appear.( Same use infrared lamps )

6.Automatic sheet feeding:For acrylic sheet,veneer sheet automatic feeding.

7.Laminating machine:Roller size:240x1350mm( four rollers),Two groups rollers laminating,the first one is silicone roller,the second one is stainless steel heating roller...

Using the air expander and tension controller to hold the paper.Machine power:2.2kw,0.5T hoist and lifter to hold the paper roller.

0.5T hoist and lifter

PUR veneer sticking machine

999x300